Want to make your own unique tap handles? But the thread type is strange and overseas prices are just $$$! The answer is these simplistic brass inserts.
All you'll need is a 12.7mm (1/2") Hole drilled into your handle (Pine, Red Gum, Oak, Cherry, Maple ect) Then screw it in with a large flat screw driver.
It is important not to push down too hard if you're going to using a screw driver, or wide drill bit. It will strip the thread. Let the piece cut into the wood. Ensure that it is straight.
Suits NukaTap, Intertap taps and many other standard tap handle threads.