NORMAL RETAIL $999.95 – CLEARANCE NOW $749.95, ONLY TWO UNITS IN STOCK.

The Benchy Sparkling – Bench Top/ Undercounter – Carbonator/Chiller is the easiest way to setup a sparkling water system. No ice or Glycol required just plumb the water and CO2 Gas and you’re ready to go.

Benchy Sparkling is the answer for instant chilled and carbonated water water on demand. Simply connect mains water and CO2 Cylinder to the unit and receive unlimited sparkling and chilled water from the taps.

Our Bency range is far superior to other units on the market in terms of cost, ease of use and flexibility. Using the regulator, you are able to adjust and really dial in carbonation levels to your specific taste preferences which you are unable to do on other similar systems on the market. This unit is also significantly cheaper and easier to setup.

Literally, all you do is*:

1. Plug into the wall
2. Connect mains water
3. Connect CO2 Cylinder
4. Pour chilled sparking water or chilled still water.

You no longer need to fill the resevoir with water. This unique system uses a solid carbon block with tiny copper tubes to chill down the water as it passes through the Benchy.

It’s that simple and you can be enjoying chilled sparking water in under 1hr with this setup and barely any time at all to cool down.

*Ensure that the unit is installed and operated according to the instruction manual which can be found under the more information tab.

Fully Adjustable – The Benchy Sparkling has integrated digital temp controller so you can control the temperature from 0.5C and up to 10C. You can also vary the carbonation level from 0.5 volumes to over 5 volumes for super bubbly water.

Cooling Performance – The Benchy Sparkling is able to chill about 20-30L of sparkling water per hour (based on ambient water and air temperature of 20C). To further increase the capacity of this unit you can pre-chill the mains water supply either by a holding tank (Keg) in the fridge or a G40 Chiller. If you pre-chill the mains water supply you can more than double the output of the Benchy Sparkling.

Specifications:

Height: 380mm

Width: 290mm

Depth: 420mm

Allow atleast 100mm at the front of the unit for ventilation + hosing bend radius.

Power Consumption:

Refrigerant: r600a – (80grams)

Cooling Power: 600watts

Power Consumption: 155w (idle power consumption less than 5 watts)

Capacity: about 25L per hour (based on 20C ambient temperature)

Input Gas: CO2 @ 2-3.5bar(8mm (5/16) OD Tube)

Input Water: Must be 1 bar (15psi) higher than gas pressure (6.35mm (1/4″) OD Tube)

Sparkling/Chilled Water Out: 8mm (5/16″) OD Tube